*Prices do not reflect $50 disassembly and reassembly fee.

We have a $50.00 Minimum.

Cerakote colors that we do not normally stock will add an additional $25 to your order.

Complete – One Color $150.00

Two Color w/ Design:

Slide or Frame only $95

Complete Handgun $240

Three Color w/ Design

Slide or Frame only $140

Complete handgun $275

Add Camo pattern (Three colors) $65.00

3 Color Kryptek pattern Complete + up to 2 mag bases $295.00

3 Color SnakeSkin pattern Complete + up to 2 mag bases $250.00

Distress Add- $40.00

Slide Only – One Color (stripped) $65.00

Frame Only – One Color (stripped) $65.00

Coat Barrel Only with Cerakote DFAC (Includes barrel bushing on 1911’s) $50.00

Coat Pistol Magazines – Each (must be one of the colors on gun) $15

Coat Pistol Magazine – Separate Color $20

Stenciling work – $15.00 Surcharge

Extreme Detail Stencil work – $50.00 Surcharge

Hardware Only – $25.00

Add Clear ( Hi-Gloss or Matte )- $35.00

Autoloading – AR-15/M4 or AK

Complete Gun: Upper and Lower Receivers, Barrel, Handguard, Pistol Grip, Pins, and Controls.

One Color:

Receiver only $65

Complete Long gun $210

Two color w/ design:

Complete long gun $290

Three color w/ Design: $375

Three Color Camouflage Pattern $375.00

Four Color Camouflage Patterns $400.00

Five Color Camouflage Patterns $425.00

Camouflage Using High-Temp Stencils – Stencil Surcharge $25.00

Coat 20/30rd AR Magazines One Color (each) $15.00

Semi-Auto Bolt and Bolt Carrier (AR or AK) Coat with Cerakote DFAC $50.00

Scope Mounts (One Color) $30.00

Scopes Target and Tactical – One (Includes masking of dials, etc) $85.00

Scopes Target and Tactical – Camouflage (costs may vary – call for quote) $125 – $250

AR Upper and Lower Receivers Only – One Color (Stripped) $125.00

Upper Only or Lower Only – $65.00

AR Upper and Lower Receivers Only – 3 color camo + Stencil charge (Stripped) $195.00

Upper / Lower / and Handrail One Color – $175.00

Barrel – one color $70.00

2 Color Fluted Barrel – $100.00

Stock: Standard A2 or M4 (One Color) $50.00

Stock: Target Adjustable (MagPul, etc) One Color $75.00

Bolt ( Micro Slick) $25.00

Bipod (One Color) $50.00

Forearm – Rail Type (One Color) $75.00

Extra Color Charges for Accessories (Each Color) $15.00

AR-10 and Variants Surcharge – add to AR-15 pricing $50.00

FN-FAL and HK-G3/G33, etc Surcharge – add to AR-15 pricing $50.00

Bolt Action Rifles – Complete

Rem 700 and similar: One Color – $195.00

With Adjustable Tactical Stocks – Surcharge: add to above $25.00

Bolt Action and Tactical 2nd Color surcharge – add $30.00

Bolt Action and Tactical – Three Color Camouflage Surcharge – add $75.00 to the 2nd color surcharge

Bolt Action and Tactical – Camouflage Four and Five Color Patterns – Surcharge (add to one color base price) $125.00

AR-30 and similar .338 Lapua and .408 CheyTac bolt action rifles – one color $275.00

Bolt Action Rifle Magazines – One Color $20.00

Bolt Action Rifle Magazines – Each Additional Color $10.00

50 BMG Bolt Action Rifles – One Color $350.00

Barrett 92A1 and similar semi-auto 50BMG rifles – One Color $500.00

50 BMG Rifles Additional Colors – Each color, add $100.00

Barrett 92A1 Magazines, ea – One Color $35.00

Barrett and 50 BMG Magazines – Additional Colors, each: $10.00

Four and Five Color Camouflage Patterns – Surcharge for .338 Lapua Tactical and 50 BMG rifles: – $250.00

Silencer – $85.00

M249, M240, Etc: CALL

Edged Weapons: CALL

CUSTOM MACHINING:

Pistol Slide RMR Install – $175.00- includes cerakote of machined cut

Slide Front Cocking Serrations – $ 90.00 +

Slide Porting – $90.00 +

*NOTE: Prices are subject to change without prior written notice. Not all firearms are the same and sometimes special circumstances may apply. CGC will notify the owner of special requirements upon receipt and inspection of the firearm and provide a revised quote before services are performed.

We do not coat sears, springs, bores/chambers or other tolerance critical or high-flex parts. In addition, we do not media blast scopes or other optics and, as a result, there will not be as good an adhesion of the Cerakote to those items.

TOLERANCE: For standard firearms applications it is often inadvisable to coat both pins and pin holes, as the resulting one (1) mil thickness of the coating when applied to rounded surfaces creates increase of two (2) mil to the part tolerance and four (4) mil (.004) when both hole and pin are coated. This is also applicable to auto-pistol slide and frame fit, such as on tight-fitting 1911’s. We typically plug or mask holes and pins and only coat the pin ends. However, we can coat pins and holes and then custom fit these parts after coating for an additional charge. We recommend hand fitting and lapping for 1911 pistol slides and frames as this will yield a precision fit and can help to tighten looser fitting slide/frame combos.

MARKINGS: For receivers, frames, slides, Picatinny rails which have painted on or lightly laser etched markings these markings will be lost during the surface preparation and coating unless they are machine engraved or stamped. If these markings are of great importance we can mask over them, but those areas in and immediately around the markings will not be coated and, as such, will not blend. Manufacturer’s serial numbers will be masked at no additional charge where needed or coated where possible. Some manufacturer model numbers, name etc which are laser engraved will be masked over. This is per BATFE (ATF) regulations. Please consult us for specific requirements.

H-Series is the most durable of the standard Cerakote family of coatings and provides the best performance in hardness, wear and scratch resistance, adhesion and rust resistance. It can withstand heat up to 500f – 600f degrees and comes in the widest range of colors. Therefore, we use the H-Series wherever possible. However, it’s a two-part heat cure finish and, therefore, cannot be applied to optics and other items or substrates which cannot, or should not be cured at the required temperatures.

For high-temp applications up to 1700°, such as suppressors and machine gun barrels, Cerakote™ C-Series has no equal. It’s available in a wide range of colors to match the overall finish requirement of the firearm or weapons system. We also use C-Series to coat scopes and other optics, as well as fiberglass and items and substrates which cannot be baked. It is not as durable as the H-Series and is less scratch and wear resistant. The primary application is optics, electronics and fiberglass stocks which cannot be hear cured.

When we say performance we mean:

Cerakote Elite Series is available in six modern, earth-tone colors that can be mixed or patterned to create custom, yet high-performance finishes. Recommended applications include, but are not limited to: Firearms, knives, tools, eyewear, consumer electronics, wearables, industrial valves, sporting and athletic equipment, robotics, audio equipment, fresh and salt water applications and any other application requiring a tough, thin and durable finish. See the entire Cerakote Elite Series here.

First off you will need a copy of our FFL to drop into your package. Contact us to obtain a copy.

Next you need to download a copy of our job form

Fill it out as complete as possible Including anything you can think of that will help us out. Make sure if you are sending parts that you list out each part and what color you want it. If you’re sending a whole gun write Entire Gun in the order list and then detail under that what you want to be done to it. Include in customer info area your Name, Address, Phone, And Email address if you have one. If you are sending in a serialized part, you must include a copy of your drivers license.  Sign the very bottom of the form stating all above is correct and include in the box. When we get it in the shop we will email, call or whatever is the best contact for you to make sure we are both on the same page before we begin work begins.

Next package up your firearm or parts securely in an unmarked package include the job form from above, a copy of your drivers license.

NOTE: When shipping a firearm, it is most important that you comply with federal, state, and local laws and regulations. The following guidelines are meant to help, but you must seek assistance from the appropriate authorities if necessary.

SEND TO:

Celina Gun Shop

Attn: Cerakote

701 N Preston Rd Ste 310

Celina, Texas 75009

Our phone number if you need it for the shipping process is 972-382-8340